New Milford, NJ., February 28, 2008 - We will be offering this unit in 2 configurations. We will offer the higher pressure 600 as seen in the video, which is definitely a water conservation tool. But, for detailers that demand even LESS water output…..We will have a 250 PSI unit, with an even SMALLER nozzle, which offers an even greater water saving. The units look and operate the same with the exception of the Ultra 250 being a slightly less expensive with a greater water saving! Here is a brief description in case you missed our last press release…..

Do you need to save and conserve water? Are you trying to "go green" and be more ECO friendly? Do you still want to be able to wash a car with the effectiveness of a pressure washer, but the water conservation of a steamer? Do you want the extreme heat of a steam machine?

We have just that machine! The Therma Kleen Ultra 600 Pressure steamer

As you know for years, we have been washing cars with large volumes of water. Water conservation wasn't on the radar and nobody really cared about being environmentally friendly. That has all changed and it's never going back.

Did you know……

• An open garden hose with a ¾ inch diameter at 40PSI will use 12-18 gallons per minute
• That same garden hose, even with a hose nozzle, when in use will use on average 7.5 gallons per minute
• A pressure washer with an average PSI of 1500 will deliver 4-5 gallons per minute

When water flow is limited, and pressure is reduced, less water will be wasted. In general we do not need extremely high pressure ratings on pressure washers, and we do not need very large nozzles to force the water through. This alone will save water. However, when you combine a little less pressure, with a very small nozzle and produce steam at 280 degrees……you have a machine that will clean more effectively, efficiently, and use a very small amount of water in the process. This is the environmentally friendly way to wash a car!

This machine is so versatile, that it can be used as a cold water pressure washer with more water volume, a hot water pressure washer, or of course, a steam pressure washer! You control the water flow and the heat by simply adjusting the temperature gage, or the fuel pressure setting. By hooking up your water source, this machine is a continuous operating machine.